Easily adjustable flight time and delay from battery connection to actuator start-up
Suitable for Flash CL ( control line )
Hauptmerkmale
Flight length setting:
plug the jumper into the pins closer to the controller connector
Connect the drive battery
from the time the propeller is turned, wait for the time you want as flight time (if I want to fly 2 minutes, I wait 2 minutes)
pull the jumper off the pins to save the settings
disconnect the propulsion battery
Flight time is set now you can remove the jumper to the accessory, plug in the battery without the jumper and hooray for the air!
Setting the length of the launch delay:
plug the jumper into the pins further away from the controller connector
connect the drive battery
after spinning the propeller, use a screwdriver to connect the 2 pins closer to the controller connector for 20s delay, then to the controller for 40s delay
pull the jumper from the pins to save the settings